No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create logical_port eth

create logical_port eth

Function

The create logical_port eth command is used to create a logical Ethernet port.

Format

create logical_port eth name=? eth_port_id=? address_family=? ipv4_address=? ipv4_mask=? [ ipv4_gateway=? ] ipv6_address=? ipv6_mask=? [ ipv6_gateway=? ] [ role=? ] [ is_private=? ] [ activation_status=? ] [ failover_enabled=? ] [ failback_mode=? ] [ failover_group_id=? ]

Parameters

Parameter

Description

Value

name=? Name of the logical port you want to create.

The value contains 1 to 31 characters, including letters, digits, periods (.), underscores (_), and hyphens (-).

eth_port_id=? Ethernet port ID.

To obtain the value, run the "show port general physical_type=eth" command. The value contains 1 to 31 characters, including letters, digits, and periods (.). The value cannot start with a digit or a period (.), or end with a period (.).

address_family=? Address family of a logical port.

The value can be "IPv4" or "IPv6".

ipv4_address=? IPv4 address of a logical port.

-

ipv4_mask=? IPv4 mask of a logical port.

-

ipv4_gateway=? IPv4 gateway of a logical port.

-

ipv6_address=? IPv6 address of a logical port.

-

ipv6_mask=? IPv6 mask of a logical port.

-

ipv6_gateway=? IPv6 getaway of a logical port.

The value must be an IPv6 address.

role=? Logical port role.

The value can be "management" or "service".

is_private=? Whether a logical port is private.

The value can be "yes" or "no". The default value is "no".

failover_enabled=? Whether failover is enabled for a logical port.

The value can be "yes" or "no".

failback_mode=? Failback mode of a logical port.

The value can be "manually" or "automatically".

activation_status=? Whether a logical port is activated.

The value can be "yes" or "no". The default value is "yes".

failover_group_id=? Failover group ID.

The value is an integer between 1 and 1024.

Level

Administrator

Usage Guidelines

  • When "address_family" is set to "IPv4","ipv4_address" must be specified.
  • When "address_family" is set to "IPv4","ipv4_mask" must be specified.
  • When "address_family" is set to "IPv6","ipv6_address" must be specified.
  • When "address_family" is set to "IPv6","ipv6_mask" must be specified.
  • OceanStor 2200 V3 storage system do not support this command.

Example

Create a logical Ethernet port.

admin:/>create logical_port eth name=lp001 eth_port_id=ENG0.A2.P2 address_family=IPv4 ipv4_address=10.178.1.133 ipv4_mask=255.255.0.0 failover_enabled=yes failback_mode=manually
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 260263

Downloads: 176

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next