No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show vlan count

show vlan count

Function

The show vlan count command is used to query the count of VLAN.

Format

show vlan count [ object_type=? ] [ object_id=? ]

Parameters

Parameter

Description

Value

object_type=? VLAN associate object type.

The value is failovergroup.

object_id=? VLAN associate object ID is an integer.

The value is an integer between 0 and 8191.

Level

Guest

Usage Guidelines

  • Parameter object_id must be specified when the parameter object_type is specified.
  • OceanStor 2200 V3 storage system do not support this command.

Example

Query number of all VLAN ports.

admin:/>show vlan count
VLAN Number : 2

System Response

The following table describes the parameter meanings.

Parameter

Meaning

VLAN Number

The count of creating VLAN.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317182

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next