No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file export_path

show file export_path


This show file export_path command is used to export system data to a directory in the storage system and show the directory to users.


show file export_path file_type=? [ controller_id=? ]





file_type=? File type.

The value can "event", "log", "running_data", "configuration_data", "all_log", or "smart" where:

  • "event": indicates event files.
  • "log": indicates log files.
  • "running_data": indicates system running data files.
  • "configuration_data": indicates system configuration files.
  • "all_log": indicates all logs of the system.
  • "smart": indicates disk smart info.
controller_id=? ID of a controller.

Separate controller IDs with commas (,). The controller IDs are in the format of "0X". X is a character ranging from A to D. For example, "0A","0D". This parameter can be specified only when "file_type" is set to "log", "all_log", or "smart".



Usage Guidelines

  • This "show file export_path" command is used to export system data to a directory in the storage system and show the directory to users.
  • This "show file export_path file_type=? [ controller_id=? ]" command is used to export system data of a specific controller to a directory in the storage system and show the directory to users in addition to log, all log and disk smart information.
  • This command is used information-gathering tools to gather system information, best with the "delete file" command with a same node.


To export system configuration data and show the path to users, run the following command:

admin:/>show file export_path file_type=configuration_data 
File Path : /OSM/export_import/db.dat

System Response

The following table describes the parameter meanings.



File Path

Save the file path.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315918

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next