No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show interface_module

show interface_module

Function

The show interface_module command is used to query details on interface modules.

Format

show interface_module [ interface_module_id=? ]

Parameters

Parameter

Description

Value

interface_module_id=? ID of an interface module.

To obtain the value, run "show interface_module" without parameter. The value contains 1 to 31 characters, including letters, digits, and periods (.).

Level

Guest

Usage Guidelines

  • To query details on all interface modules, run show interface_module.
  • To query details on a specific interface module, run show interface_module interface_module_id=?.

Example

  • To query details on all interface modules, run the following command. The command output varies depending on a specific product.

    admin:/>show interface_module
    ID Health Status Running Status Model
    ------- ------------- -------------- --------------------------------
    ENG0.A0 Normal Running 4x8G FC Optical Interface Module
    ENG0.B0 Normal Running 4x8G FC Optical Interface Module
  • To query details on the interface module whose ID is "ENG0.A1", run the following command. The ID and output vary depending on a specific product.

    admin:/>show interface_module interface_module_id=ENG0.A1
     
    ID : ENG0.A1
    Health Status : Normal
    Running Status : Running
    Model : 4x8G FC Optical Interface Module
    Logic Version : --
    PCB Version : STL1IF84 VER.A
    Temperature(Celsius) : 28
    Electronic Label : [Board Properties]
    BoardType=STL1IF84
    BarCode=02G248D0C5000228
    Item=0302G248
    Description=PANGEA,STL1IF84,
    4*8Gbps Fibre Channel I/O modules(Total 4 ports),2*1
    Manufactured=2012-06-05
    VendorName=Huawei
    IssueNumber=00
    CLEICode=
    BOM=

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 262056

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next