No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove clone secondary_lun

remove clone secondary_lun


The remove clone secondary_lun command is used to remove secondary logical unit numbers (LUNs) from a clone task.


remove clone secondary_lun clone_id=? lun_id=?





clone_id=? ID of a clone task from which you want to remove secondary LUNs.

To obtain the value, run "show clone general".

lun_id=? ID of a secondary LUN that you want to remove.

To obtain the value, run "show clone secondary_lun".



Usage Guidelines

Running this command deletes the information on the selected secondary LUN and that on the clone pair associated with the LUN.


To remove secondary LUN "2" from clone task "2", run the following command:

admin:/>remove clone secondary_lun clone_id=2 lun_id=2
WARNING: You are about to remove secondary LUN of clone. This operation will remove the mirror relationship between primary LUN and secondary LUN.
Suggestion: Before performing this operation, ensure that the selected secondary LUN is correct to avoid misoperation.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317489

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next