No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show host host_group

show host host_group

Function

The show host host_group command is used to query information about the host group that is associated with a host.

Format

show host host_group host_id=?

Parameters

Parameter

Description

Value

host_id=? Host ID.

To obtain the value, run "show host general".

Level

Guest

Usage Guidelines

None

Example

Query information about the host group that is associated with host "0".

admin:/>show host host_group host_id=0
 
  Host Group ID  Host Group Name  
  -------------  ---------------  
  0              HostGroup000

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Host Group ID

ID of the host group.

Host Group Name

Name of the host group.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316517

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next