No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show clone secondary_lun

show clone secondary_lun

Function

The show clone secondary_lun command is used to query the information on existing secondary logical unit numbers (LUNs) for a clone task.

Format

show clone secondary_lun clone_id=? [ lun_id=? ]

Parameters

Parameter

Description

Value

clone_id=? ID of a clone task.

To obtain the value, run "show clone general".

lun_id=? ID of the secondary LUN.

To obtain the value, run "show clone general".

Level

Guest

Usage Guidelines

  • To query the information of all secondary LUNs for a clone task, run show clone secondary_lun clone_id=?.
  • To query the information of a secondary LUN for a clone task, run show clone secondary_lun clone_id=? lun_id=?.

Example

  • To query the information on existing secondary LUNs for clone task "2", run the following command:

    admin:/>show clone secondary_lun clone_id=2
     
    ID LUN Data Pair Health Running LUN
    Name Status ID Status Status Capacity
    -- ---------- ------------- ----- ------ ------- --------
    2 newlun0002 Synchronized 2 Normal Normal 5.000GB
  • To query the information of secondary LUN "2" form a clone task "2", run the follow command:

    admin:/>show clone secondary_lun clone_id=2 lun_id=2
     
    ID : 2
    LUN Name : newlun0002
    Data Status : Synchronizing
    Pair ID : 0
    Health Status : Normal
    Running Status : Synchronizing
    Rate : Middle
    Process : 11
    Start Time : 2012-09-20/09:04:55 +08:00
    End Time : --
    Split Time : --
    Recovery Policy : Automatic
    LUN Role : Secondary
    LUN Capacity : 5.000GB
    Clone ID : 2

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 241437

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next