No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete lun_group

delete lun_group


delete lun_group command is used to delete a specified LUN group.


delete lun_group lun_group_id=?





lun_group_id=? LUN group ID.

To obtain the value, run "show lun_group general".



Usage Guidelines

If a LUN group has LUNs, remove all LUNs from it before deleting it.


Delete LUN group "2".

admin:/>delete lun_group lun_group_id=2
WARNING: You are about to delete LUN group. This operation cannot be undone. This operation will delete all LUNs within the LUN group and the information about the LUN group from the system.
Suggestion: Before performing this operation, ensure that the selected LUN group is no longer necessary.
Have you read warning message carefully?(y/n)Y
Are you sure you really want to perform the operation?(y/n)Y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316016

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next