No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain ad

show domain ad


The show domain ad command is used to check the configuration of the AD domain controller and check whether the disk array successfully joined the domain.


show domain ad





Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


To check the configuration of the AD domain controller, run the following command:

admin:/>show domain ad
  Domain Status          : Joined                                      
  Full Domain Name       :                                       
  NTLM Level             : 0                                                
  Organization Unit      : ou                                               
  Cluster Name           : storage                                      
  Site Name              : china                                        
  Join Domain Error Info : --

System Response

The following table describes the parameter meanings.



Domain Status

Indicates the status of the domain the disk array joins.

Full Domain Name

Indicates the name of the domain.

NTLM Level

Indicates the security level of NTLM verification.

Organization Unit

Indicates the organization unit of the machine account.

Cluster Name

Indicates the machine account.

Site Name

Indicates the site where the domain controller resides.

Join Domain Error Info

Indicates the reason of a domain joining failure.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317327

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next