No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove consistency_group remote_replication

remove consistency_group remote_replication


The remove consistency_group remote_replication command is used to delete remote replication tasks from a consistency group.


remove consistency_group remote_replication consistency_group_id=? remote_replication_id=?





consistency_group_id=? ID of a consistency group.

To obtain the value, run "show consistency_group general".

remote_replication_id=? ID of the remote replication tasks that you want to delete.

To obtain the value, run "show remote_replication general".



Usage Guidelines

  • Running this command destroys the status consistency between the selected remote replication task and the selected consistency group.
  • Before running this command, ensure that the selected remote replication task is exactly the one you want to delete.
  • You can run this command only on the primary end for a consistency group.


To remove the remote replication tasks whose ID isrespectively "9747215445131235" from consistency group "9747215445131264", run the following command:

admin:/>remove consistency_group remote_replication consistency_group_id=9747215445131264 remote_replication_id=9747215445131235
DANGER: You are about to remove remote replication task from consistency group.After this operation, the status of the remote replication task becomes inconsistent with that of the consistency group.
Suggestion: Before performing this operation, ensure that the selected remote replication task is correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 364594

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next