No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change user_session number

change user_session number


The change user_session number command is used to change the number of sessions supported by the system.


change user_session number max_number=?





max_number=? Number of sessions supported by the system.

The value can be "32" or "128", where: The value can be:

  • 32: The system supports 32 sessions.
  • 128: The system supports 128 sessions.


Super administrator

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


Change the number of sessions supported by the system to "128".

admin:/>change user_session number max_number=128
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316575

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next