No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system name

change system name

Function

The change system name command is used to change the storage system's name.

Format

change system name name=?

Parameters

Parameter

Description

Value

name=? New storage system name.

The value contains 1 to 127 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

Level

Administrator

Usage Guidelines

None.

Example

Changing the name of the storage system to newsystem.

admin:/>change system name name=newsystem
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369743

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next