No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_consistency_group start

change hyper_metro_consistency_group start


The change hyper_metro_consistency_group start command is used to forcibly start a HyperMetro consistency group.


change hyper_metro_consistency_group start consistency_group_id=?





consistency_group_id=? ID of the consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To forcibly start HyperMetro consistency group 1, run the following command.

admin:/>change hyper_metro_consistency_group start consistency_group_id=1
DANGER: You are about to forcibly enable host access permissions of member LUNs in the HyperMetro consistency group. 
Ensure that the remote site does not accept host access request. Otherwise, data loss may occur. 
Suggestion: Before performing this operation, disconnect the remote site from hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316487

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next