No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hypervault_policy general

show hypervault_policy general


The show hypervault_policy general command is used to query a HyperVault policy.


show hypervault_policy general [ hypervault_id=? | policy_id=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

policy_id=? ID of the HyperVault policy.

To obtain the value, run the "show hypervault_policy general" command without parameters.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


  • To query the detailed information on hypervault task "56892142".

    admin:/>show hypervault_policy general hypervault_id=56892142
       ID           Name     Type     Status    HyperVault ID  Copy Threshold
    -------------  ------  --------   -------   --------------  ----------------
    2002562256225  weekly    local     on         56892142            255
  • To query the detailed information of polciy "2002562256225".

    admin:/>show hypervault_policy general policy_id=2002562256225
    ID:                 2002562256225
    Name:               weekly
    Type:               local
    Period:             weekly
    Status:             on
    HyperVault ID:      56892142
    Day Of Week:        sun
    Day Of Month:       --
    Interval Day:       --
    Frequency Hour:     2
    Frequency Minute:   --
    Start_time:         ---
    Copy Threshold:     255
  • To query the all policy information on existing hypervault tasks.

    admin:/>show hypervault_policy general
    ID Name Type Status HyperVault ID Copy Threshold
    ------------- ------ -------- ------- -------------- ----------------
    2002562256225 weekly local on 56892142 255

System Response

The following table describes the parameter meanings.




Indicates the ID of the HyperVault policy.


Indicates the name of the HyperVault policy.


Indicates the type of the HyperVault policy.


Policy cycle type.


Policy status.

HyperVault ID

HyperVault ID.

Day Of Week

Days of a week.

Day Of Month

Days of a month.

Interval Day

Interval of days.

Frequency Hour

Interval of hours.

Frequency Minute

Interval of minutes.

Start Time

Policy execution time.

Copy Threshold

Maximum threshold of copy count.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365950

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next