No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create schedule relocate

create schedule relocate

Function

The create schedule relocate command is used to create SmartTier data relocation policies. By creating data relocation policies, you can relocate the data in a storage pool at a specific time to fully utilize the performance and capacity features of different storage tiers and to improve overall storage system performance.

Format

create schedule relocate name=? pool_id=? period=? [ day_of_week=? ] [ start_time=? ] [ duration=? ]

Parameters

Parameter

Description

Value

name=? Name of a data relocation policy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

pool_id=? ID of a storage pool in which data relocation will be performed.

To obtain the value, run "show storage_pool general".

period=? The relocation period.

The value can be:

  • "daily": The policy is executed daily.
  • "weekly": The policy is executed weekly.
day_of_week=? The day on which data relocation will be cycled weekly. This parameter must be assigned and it is valid only when period=? is set to "weekly".

You can specify multiple days in a week and separate them with commas (,). The value can be "sun", "mon", "tue", "wed", "thu", "fri", or "sat", where:

  • "sun": indicates Sunday.
  • "mon": indicates Monday.
  • "tue": indicates Tuesday.
  • "wed": indicates Wednesday.
  • "thu": indicates Thursday.
  • "fri": indicates Friday.
  • "sat": indicates Saturday.
start_time=? The time from which data relocation will be started on a specific day in a week.

The value is in the format of HH:MM. The value ranges from 00:00 to 23:59.

The default value is "01:00".

duration=? The data relocation duration.

The value is in the format of HH:MM or H:M. The value ranges from 00:30 to 24:00.

The default value is "04:00".

Level

Administrator

Usage Guidelines

  • The prerequisite for running this command is that the selected storage pool contains at least two storage tiers.
  • The SmartTier data relocation function can fully utilize the performance and capacity features of different hard disks on the storage system. For example, you can use this function to relocate hot data to the high-performance tier consisting of solid

    state drives (SSDs), and to relocate cold data to the capacity tier consisting of near-line Serial attached SCSI (NL-SAS) disks.

  • Data relocation policies are formulated by referring to I/O monitoring policies. For details on creating I/O monitoring policies, see "create schedule monitor".

Example

To create a data relocation policy on storage pool "2", where the name of the policy is "newrelocate", the policy will be started from "12:05" on each Tuesday, and the policy execution will last for an hour, run the following command:

admin:/>create schedule relocate name=newrelocate pool_id=2 period=weekly day_of_week=tue start_time=12:05 duration=1:00
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235228

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next