No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hypervault general

create hypervault general

Function

The create hypervault general command is used to create the HyperVault function.

Format

create hypervault general local_fs_id=? [ remote_device_id=? remote_fs_id=? ] [ recover_policy=? ] [ backup_rate=? ] [ start_backup_after_create=? ]

Parameters

Parameter

Description

Value

local_fs_id=? ID of the local file system.

To obtain the value, run the "show file_system general" command without parameters.

remote_device_id=? ID of the remote device.

To obtain the value, run the "show remote_device general" parameter.

remote_fs_id=? ID of the remote file system.

To obtain the value, run the "show file_system general" command without parameters.

recover_policy=? Error rectifying policy.

The value is "automatic" or "manual", where:

  • "automatic": The hypervault will automatically recover, and data will be automatically backup from the primary device to the secondary device.
  • "manual": The hypervault needs to be recovered manually. Data will not be automatically backup from the primary device to the secondary device.
The default value is "automatic".
backup_rate=? Backup rate.

The value is "low", "middle", "high", or "highest", where:

  • "low": slow backup speed.
  • "middle": medium backup speed.
  • "high": fast backup speed.
  • "highest": the fastest backup speed.
The default value is "middle".
start_backup_after_create=? Whether to immediately start backup after a remote replication job is created.

The value is "yes" or "no", where:

  • "yes": to start the initial backup.
  • "no": not to start the initial backup.
The default value is "yes".

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

Create a hypervault,the local file system ID to "0", remote device ID to "0", and remote file system ID to "1".

admin:/>create hypervault general local_fs_id=0 remote_device_id=0 remote_fs_id=1 
 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 241926

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next