No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ftds level

change ftds level

Function

The change ftds level command is used to set the trace level of Flow Tracing & Diagnosing System (FTDS) function. The level includes subsystem level, key module level, module level and debug level.

Format

change ftds level level=?

Parameters

Parameter

Description

Value

level=? The trace level of FTDS.

The parameter is "Subsystem", "Key_module", "Module" or "Debug".

Level

Administrator

Usage Guidelines

The command is used to set trace level of FTDS.

Example

Set the trace level of FTDS.

admin:/>change ftds level level=Module
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 262059

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next