No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change logical_port failback

change logical_port failback

Function

The change logical_port failback command is used to failback logical port.

Format

change logical_port failback logical_port_name=?

Parameters

Parameter

Description

Value

logical_port_name=? Logical port name. The value is 1 to 31 characters in length. Characters include numbers, letters, periods (.), underscores (_), and hyphens (-).

To obtain the value, run "show logical_port general".

Level

Administrator

Usage Guidelines

  • Before performing this operation, ensure that the modification is necessary.
  • OceanStor 2200 V3 storage system do not support this command.

Example

To failback logical port lif1.

admin:/>change logical_port failback logical_port_name=lif1
DANGER: You are about to perform logical port failback. This operation may interrupt services or cause service exceptions. Before performing this operation, determine whether the modification is necessary. 
Have you read danger alert message carefully?(y/n)Y 
Are you sure you really want to perform the operation?(y/n)Y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236441

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next