No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group general

show failover_group general


The show failover_group general command is used to query the failover groups on the storage system.


show failover_group general [ failover_group_id=? ]





failover_group_id=? Indicates the ID of the failover group.

The value is an integer between 0 and 8191.



Usage Guidelines

  • You can use the "show failover_group general" command to query details on all failover groups.
  • You can use the "show failover_group general failover_group_id=?" command to query details on a specific failover group.
  • OceanStor 2200 V3 storage system do not support this command.


  • To query all failover groups, run the following command.

    admin:/>show failover_group general
    Failover Group ID Name Description Group Type 
    ----------------- --------------------- -------------------- ---------- 
    0 System-defined System-FailoverGroup System 
    4097 VLAN-FailoverGroup-1 VLAN-FailoverGroup VLAN 
    4098 VLAN-FailoverGroup-2 VLAN-FailoverGroup VLAN 
    4101 VLAN-FailoverGroup-5 VLAN-FailoverGroup VLAN 
    4102 VLAN-FailoverGroup-6 VLAN-FailoverGroup VLAN 
    4104 VLAN-FailoverGroup-8 VLAN-FailoverGroup VLAN 
    4184 VLAN-FailoverGroup-88 VLAN-FailoverGroup VLAN
  • To query failover group 0, run the following command:

    admin:/>show failover_group general failover_group_id=0
    Failover Group ID : 0 
    Name : System-defined 
    Description : System-FailoverGroup 
    Group Type : System

System Response

The following table describes the parameter meanings.



Failover Group ID

Indicates the ID of the failover group.


Indicates the name of the failover group.


Indicates descriptions of the failover group.

Group Type

Indicates the type of the failover group.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316508

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next