No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance host

show performance host


The show performance host command is used to query the performance statistics on hosts. If you want to analyze the real-time performance statistics on hosts, run this command.


show performance host host_id=?

show performance host host_id_list=?





host_id=? ID of a host.

To obtain the value, run "show host general".

host_id_list=? ID list of hosts.
  • To obtain the value, run "show host general".
  • Separate the host IDs with commas (,) or hyphens (-).



Usage Guidelines

  • After this command is executed, performance data categories are displayed. You can enter the serial number before a category and press "Enter" to view the category of data. You can enter multiple serial numbers and use commas (,) to separate them.
  • Performance statistics will be updated in real time.
  • Typing "q" on the command line interface (CLI) exits the active performance statistics display.


Query the performance statistics on the read I/Os of host "0".

admin:/>show performance host host_id=0
0.Max. Bandwidth(MB/s)                                   
1.Usage Ratio(%)                                         
2.Queue Length                                           
3.Bandwidth(MB/s) / Block Bandwidth(MB/s)                
5.Read Bandwidth(MB/s)                                   
6.Average Read I/O Size(KB)                              
7.Read Throughput(IOPS)(IO/s)                            
8.Write Bandwidth(MB/s)                                  
9.Average Write I/O Size(KB)                             
10.Write Throughput(IOPS)(IO/s)                          
11.Service Time(Excluding Queue Time)(ms)                
12.Read I/O Granularity Distribution: [0K,1K)(%)         
13.Read I/O Granularity Distribution: [1K,2K)(%)         
14.Read I/O Granularity Distribution: [2K,4K)(%)         
15.Read I/O Granularity Distribution: [4K,8K)(%)         
16.Read I/O Granularity Distribution: [8K,16K)(%)        
17.Read I/O Granularity Distribution: [16K,32K)(%)       
18.Read I/O Granularity Distribution: [32K,64K)(%)       
19.Read I/O Granularity Distribution: [64K,128K)(%)      
20.Read I/O Granularity Distribution: [128K,256K)(%)     
21.Read I/O Granularity Distribution: [256K,512K)(%)     
22.Read I/O Granularity Distribution: >= 512K(%)         
23.Write I/O Granularity Distribution: [0K,1K)(%)        
24.Write I/O Granularity Distribution: [1K,2K)(%)        
25.Write I/O Granularity Distribution: [2K,4K)(%)        
26.Write I/O Granularity Distribution: [4K,8K)(%)        
27.Write I/O Granularity Distribution: [8K,16K)(%)       
28.Write I/O Granularity Distribution: [16K,32K)(%)      
29.Write I/O Granularity Distribution: [32K,64K)(%)      
30.Write I/O Granularity Distribution: [64K,128K)(%)     
31.Write I/O Granularity Distribution: [128K,256K)(%)    
32.Write I/O Granularity Distribution: [256K,512K)(%)    
33.Write I/O Granularity Distribution: >= 512K(%)        
34.Average I/O Latency(ms)                               
35.Max. I/O Latency(ms)                                  
36.Average Read I/O Latency(ms)                          
37.Average Write I/O Latency(ms)                         
38.Average IO Size                                       
39.% Read                                                
40.% Write                                               
41.Max IOPS(IO/s)                                        
42.Average I/O Latency(us)                               
43.Max. I/O Latency(us)                                  
44.Average Read I/O Latency(us)                          
45.Average Write I/O Latency(us)
Input item(s) number seperated by comma:7
  Read Throughput(IOPS) (IO/s) : 35

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369645

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next