No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair start

change hyper_metro_pair start

Function

The change hyper_metro_pair start command is used to forcibly start a HyperMetro pair.

Format

change hyper_metro_pair start pair_id=?

Parameters

Parameter

Description

Value

pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command to obtain the value.

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

To forcibly start HyperMetro pair "1", run the following command.

admin:/>change hyper_metro_pair start pair_id=1
DANGER: You are going to forcibly start host access of a member LUN in a HyperMetro pair on the local storage array.
Before performing this operation, ensure that host access at the remote site is stopped. Otherwise, data loss may occur.
Suggestion: Before performing this operation, disconnect the storage array at the remote site from hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 262249

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next