No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smartqos_policy file_system

remove smartqos_policy file_system

Function

The remove smartqos_policy file_system command is used to remove logical unit numbers (file systems) from a specific SmartQoS policy.

Format

remove smartqos_policy file_system smartqos_policy_id=? file_system_id_list=?

Parameters

Parameter

Description

Value

smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

file_system_id_list=? IDs of the file systems that you want to remove.

To obtain the value, run "show smartqos_policy general".

You can specify multiple file system IDs separated by commas (,), or ID range separated by hyphens(-), such as: 0,5-8.

A maximum of 64 objects are allowed.

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

To remove file systems "3", "4", and "5" from SmartQoS policy "0", run the following command.

admin:/>remove smartqos_policy file_system smartqos_policy_id=0 filesystem_id_list=3,4,5
WARNING: You are about to remove file system from traffic control policy.
This operation may affect file system performance.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and file system are selected.
Have you read warning message carefully?(y/n)y
Are you sure really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319745

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next