No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EMC VNX/EMC VNX2 Series

EMC VNX/EMC VNX2 Series

This section describes the precautions about configuration operations performed on the EMC VNX/EMC VNX2 series whose LUNs are hosted by the OceanStor 2200 V3/2600 V3.

Set Initiator Type to CLARiiON/VNX, and Failover Mode to Active-Active mode(ALUA)-failovermode 4. When configuring the series of storage systems, note the following:

NOTE:

Before resetting Failover Mode, disconnect the host port (that corresponds to the initiator) on the local storage system from EMC storage system. After the resetting is complete, restore the connection.

NOTE:

For details about how to set parameters that are not mentioned in this section, see the related documents of the EMC VNX/EMC VNX2 series.

Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 55952

Downloads: 143

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next