No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EMC VMAX Series

EMC VMAX Series

This section describes the precautions about configuration operations performed on the EMC VMAX series whose LUNs are hosted by the OceanStor 2200 V3/2600 V3.

When creating configuring a port, set parameters based on the following information:
  • Set Negotiate_Reset(N) to Disabled.
  • Set Soft_Reset(S) to Disabled.
  • Set Environ_Set(E) to Disabled.
  • Set HP3000_Mode(B) to Disabled.
  • Set Common_Serial_Number(C) to Enabled.
  • Set Disable_Q_Reset_on_UA(D) to Enabled.
  • Set Sunapee(SCL) to Disabled.
  • Set Siemens(S) to Disabled.
  • Set Sequent(SEQ) to Disabled.
  • Set Avoid_Reset_Broadcast(ARB) to Disabled.
  • Set Server_On_AS400(A4S) to Disabled.
  • Set SCSI_3(SC3) to Enabled.
  • Set SPC2_Protocol_Version(SPC2) to Enabled.
  • Set SCSI_Support1(OS2007) to Enabled.
  • Set Volume_Set_Addressing(V) to Disabled.
  • Set Non_Participating(NP) to Disabled.
  • Set Unique_WWN(UWN) to Enabled.
  • Set Access_Logix(ACLX) to Enabled.
  • Set OpenVMS(OVMS) to Disabled.
  • Set AS400(AS4) to Disabled.
  • Set Auto_Negotiate(EAN) to Enabled.
  • For a standard direct-connection network, set Init_Point_to_Point to Disabled; For a standard switched network, set Init_Point_to_Point to Enabled.
Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 64470

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next