No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Do the Remote LUN and FC Link Tab Pages of DeviceManager Display Different Device Models for the Same HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 Storage System Connected to a Local Storage System?

Why Do the Remote LUN and FC Link Tab Pages of DeviceManager Display Different Device Models for the Same HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 Storage System Connected to a Local Storage System?

Question

Why do the Remote LUN and FC Link tab pages of DeviceManager display different device models for the same HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 storage system connected to a local storage system?

Answer

  • If the HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 storage system did not map external LUNs to the local storage system when it was initially connected to the storage system, or external LUNs have been mapped but Host LUN ID is not 0, the HDS USP-VM/HDS USP-V/SUN 9985V/SUN 9990V/HP XP20000/HP XP24000 storage system's device model obtained by the local storage system is DISK-SUBSYSTEM and is displayed on the FC Link tab page of DeviceManager. Even through external LUN are mapped afterwards, the device model displayed on the FC Link tab page will not change.

    After external LUNs are mapped to the local storage system, the HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 storage system's device model obtained by the local storage system is OPEN-V. At this time, the device model displayed on the Remote LUN tab page is OPEN-V.

  • If the HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 storage system mapped external LUNs to the storage system when it was initially connected to the local storage system and Host LUN ID is 0, the HDS USP/NSC series/HDS USP-V/ USP-VM /SUN 9985/9985V/9990/9990V/HP SVS200/XP10000/12000/20000/24000 storage system's device model obtained by the local storage system is OPEN-V. At this time, the device model displayed in DeviceManager is OPEN-V.
Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 57047

Downloads: 143

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next