No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI S12100/S12300

HUAWEI S12100/S12300

This section describes the precautions about configuration operations performed on the HUAWEI S12100/S12300 whose LUNs are hosted by the OceanStor 2200 V3/2600 V3.

  • For a standard direct-connection network, set Connection Topology to FC-AL Connection; For a standard switched network, set Connection Topology to Fabric Connection.
  • Configure port parameters based on the values in the following figure.

    Transfer Rate

    8G/4G/2Gbps Auto

    Affinity Mode

    ON

    Reset Scope

    T_L

    NOTE:

    In the preceding figure, the Loop-ID (Manual), Loop-ID (Auto), FC Frame Size and Reserve Cancel at Chip Reset configuration has no restrictions.

  • Configure host parameters based on the values in the following figure.

    Command Time-out Interval

    Standard (25Seconds)

    Byte-0 of Inquiry Response

    No Conversion (Default)

    Inquiry VPD ID Type

    Type1+Type3 (Default)

    Inquiry Standard Data Version

    Version 05 (Default)

    Host Specific Mode

    Normal Mode (Default)

    Asymmetric/Symmetric Logical Unit Access

    ACTIVE/ACTIVE (Default)

    LUN Mapping Changes

    Report

    LUN Capacity Expansion

    Report

    Vendor Unique Sense Code

    Report

    Sense Code Conversion Pattern

    Linux Recommended (When not using GRMPD)

    NOTE:

    In the preceding figure, the Reservation Conflict Response for Test Unit Ready configuration has no restrictions.

NOTE:

For details about how to set parameters that are not mentioned in this section, see the related documents of the HUAWEI S12100/S12300.

Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 62840

Downloads: 144

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next