No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IBM DS8000 Series

IBM DS8000 Series

This section describes the precautions about configuration operations performed on the IBM DS8000 series whose LUNs are hosted by the OceanStor 2200 V3/2600 V3.

  • When creating a host, set host type to LinuxSuse or profile to Intel - LinuxSuse.

    When running the mkvolgrp command to create a volume group, set host type to LinuxSuse or set type to scsimap256.

  • When creating a volume group, set type to scsimap256.
  • For a standard direct-connection network, set the port mode to FC-AL.
  • For a switched network, set the port mode to SCSI-FCP.

For details about how to set parameters that are not mentioned in this section, see the related documents of the IBM DS8000 series.

Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 63572

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next