No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HP 3PAR Series

HP 3PAR Series

This section describes the precautions about configuration operations performed on the HP 3PAR series whose LUNs are hosted by the OceanStor 2200 V3/2600 V3.

  • Do not map the same LUN with different host LUN IDs to hosts and the host group where the hosts reside.
  • For a standard direct-connection network, set Connection Type to Loop. For a standard switched network, set Connection Type to Point.
  • When creating a host, set Persona to 1-Generic.
  • When setting the port, set Connection mode to Host, set VLUN Change Notification (VCN) to Disabled.

For details about how to set parameters that are not mentioned in this section, see the related documents of the HP 3PAR series.

Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 62767

Downloads: 144

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next