No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Can I Do If the New Configuration of an External LUN on a Heterogeneous Storage System Cannot Be Synchronized to the Local Storage System?

What Can I Do If the New Configuration of an External LUN on a Heterogeneous Storage System Cannot Be Synchronized to the Local Storage System?

Question

What can I do If the new configuration of an external LUN on a heterogeneous storage system cannot be synchronized to the local storage system?

Answer

If information about the external LUN is not updated on the local storage system after operations on the heterogeneous storage system such as adding or deleting initiators or LUN mappings, or expanding external LUNs, manually scan the local storage system for LUNs.

Manually scan for LUNs using one of the following methods:
  • Start an automatic LUN scan in DeviceManager.
  • In CLI, run the scan remote_luncommand.
NOTE:

The operations in the following procedure are based on DeviceManager. For details about how to use scan remote_lun, see OceanStor 2200 V3&2600 V3 Storage System V300R005 Command Reference .

  1. Log in to the DeviceManager for the local storage system.
  2. Go to the Automatic LUN Scan dialog box.
    1. On the navigation bar, click Data Protection.

      The Data Protection page is displayed.

    2. In the left function pane, click Remote Device.

      The Remote Device page is displayed.

    3. Based on Name and SN, select the remote device that corresponds to the heterogeneous storage system. In the lower function pane, click Automatic Scan.

      The OK dialog box is displayed.

  3. Click OK to start an automatic LUN scan.

    DeviceManager then scans for LUNs, and synchronizes the configuration of the remote LUN with that of the external LUN and updates the number of remote LUNs.

  4. Click Close.
Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 55495

Downloads: 143

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next