No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HP MSA2312FC/MSA2324FC

HP MSA2312FC/MSA2324FC

This section describes the precautions about configuration operations performed on the HP MSA2312FC/MSA2324FC storage system that is taken over by the OceanStor 2200 V3/2600 V3.

  • In a scenario where a standard direct-connection network is used, choose Configuration > System Settings > Host Interfaces and set Connection Mode to loop.
  • In a scenario where a standard switch network is used, choose Configuration > System Settings > Host Interfaces and set Connection Mode to Point to Point.
  • In the Manage Host Mappings dialog box, set Access to read-write.
    NOTE:

    After modifying the link mode, remove and insert the cables.

NOTE:

For details about other parameters, see the documents specific to HP MSA2312FC/MSA2324FC storage system.

Translation
Download
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 64476

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next