No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Offline Takeover

Configuring Offline Takeover

If the offline takeover function is configured, you can use the OceanStor 2200 V3/2600 V3 storage system (local storage system) to take over LUNs of a heterogeneous storage system to achieve data migration and service takeover after you temporarily suspend host services.

To master GUI-based operations, you are advised to read this document and practice the operations using the DeviceManager Demo. As a simulation program of storage system management software, the DeviceManager Demo simulates configuration and management operations on a storage system.

Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 62856

Downloads: 144

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next