No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 SmartVirtualization Feature Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VCS Cluster

VCS Cluster

This section describes how to configure a VCS cluster.

  • If you map the LUN whose host lun id is 0 from the heterogeneous storage system or local storage system to a VCS cluster, you must restart the VCS cluster so that the LUN can be scanned.
  • Before eDevLUNs are taken over (that is, before the change lun_takeover finish_switch_path command is executed on all eDevLUNs), new logical disks cannot be created and used in VCS.
Updated: 2018-12-29

Document ID: EDOC1000106155

Views: 56478

Downloads: 143

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next