No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Glossary

Glossary

B

  

BMC

BMC stands for baseboard management controller. The BMC is a management module that complies with the Intelligent Platform Management Interface (IPMI) standard, collects, processes, and stores sensor signals, and monitors the operating status of each component. The BMC provides the hardware status and alarm information of managed objects for the CMC to implement device management.

     

C

  

CC-NUMA

CC-NUMA stands for Cache Coherent Non-Uniform Memory Access.

CMC

CMC stands for central management console. It monitors the status of intra-cabinet modules and detects device faults. You can log in to the WebUI and CLI of the active CMC to query status of intra-cabinet modules, power on or off the modules, and upgrade module firmware.

     

E

  

ejector lever

A component used to fasten or release a module.

Ethernet

A baseband local area network (LAN) architecture developed by Xerox Corporation by partnering with Intel and DEC. Ethernet uses the Carrier Sense Multiple Access/Collision Detection (CSMA/CD) access method and allows data transfer over various cables at 10 Mbit/s. The Ethernet specification is the basis for the IEEE 802.3 standard.

     

K

  

KVM

KVM stands for keyboard, video, and mouse. The KVM is a set of devices that provide input and output functions for server components inside a cabinet.

     

M

  

mezzanine card

A device that is connected to the mainboard through a connector and level to the mainboard. It is usually used on a device with limited space.

     

R

  

RAID

RAID stands for redundant array of independent disks. RAID is a storage technology that combines multiple independent physical disks into a logical disk (disk group) in several ways, which are called RAID levels, to provide higher storage and redundancy performance than a single physical disk.

redundancy

A mechanism that allows a backup device to automatically replace the faulty one to ensure that the system still operates properly even if a device fails.

     

S

  

server

A special computer that provides various services for clients in the network environment.

     

U

  

U

A unit defined in International Electrotechnical Commission (IEC) 60297-1 to measure the height of a cabinet, chassis, or subrack. 1 U = 44.45 mm = 1.75 in.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 103815

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next