No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a CPI

Installing a CPI


Install a central partition interconnect module (CPI) to replace the faulty one.



No special conditions are required for this operation.


No data preparation is required for this operation.


  • ESD gloves
  • Packaging materials, for example, an ESD bag


Spare CPI


  1. Take the spare CPI out of its ESD bag.
  2. Insert the CPI into the central management enclosure (CME) as far as it will go. See step (1) in Figure 6-26.
  3. Close the CPI ejector levers until the CPI is latched. See step (2) in Figure 6-26.

    Figure 6-26 Installing a CPI

  4. Connect all cables to the CPI.
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104896

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next