No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Hot-Swappable PCIe Card

Removing a Hot-Swappable PCIe Card

Scenarios

Remove a hot-swappable PCIe card from a back I/O module (BIO) if the PCIe card has failed.

Prerequisites

Conditions

The support for hot swap of PCIe cards depends on the operating system (OS) type. By default, the following OSs support hot swap of PCIe cards:

  • Windows
  • SUSE Linux Enterprise Server (SLES) 11 (A driver must be loaded.)
  • SLES 12
  • Red Hat Enterprise Linux (RHEL) 6 and 7
  • You can obtain the OS versions and drive download links from the Server Compatibility Checker.
NOTE:

Only SLES and RHEL support hot swap of PCIe SSD cards.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Procedure

  1. Determine the locations of the status indicator, power indicator, and hot swap button on the PCIe card. See Figure 6-111.
  2. Press the hot swap button on the right of the PCIe card.
  3. Wait until the power indicator on the PCIe card is off. After the power indicator is off, the PCIe card is removable.

    1

    PCIe card status indicator

    2

    PCIe card power indicator

    3

    PCIe card hot swap button

    Figure 6-111 Locations of the status indicator, power indicator, and hot swap button

  4. Press the green latch on the PCIe card handle. See step (1) in Figure 6-112.
  5. Gently remove the PCIe card by holding its handle. See step (2) in Figure 6-112.
  6. Place the removed PCIe card in an ESD bag.

    Figure 6-112 Removing a hot-swappable PCIe card

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 100119

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next