Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Fan Module
Scenarios
Remove a fan module if it has failed.
Prerequisites
Conditions
No special conditions are required for this operation.
Data
No data preparation is required for this operation.
Tools
- ESD gloves
- Packaging materials, for example, an ESD bag
Procedure
Place only one fan module in an ESD bag.
- Hold down the plastic latch on the inner side of the fan module handle. See step (1) in Figure 6-51.
- Gently remove the fan module. See step (2) in Figure 6-51.
- Place the removed fan module in an ESD bag.
Previous
