No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a Serial Cable

Connecting a Serial Cable

Preparations

  • Precautions

    Each local partition management module (LPM) provides a standard RJ45 serial port at the rear, which is unavailable or used as the system serial port by default. You can set it as the iBMC serial port on the central management console (CMC) CLI.

    The serial port can be used in the following scenarios:

    • Used as the system serial port to monitor the status of the operating system (OS).
    • Used as the iBMC serial port for debugging and fault locating.
  • Preparations for installation
    • You have determined the cabinet number and installation position for the server to be connected.
    • You have obtained a serial cable with an RJ45 connector.
    • For details about the command for setting the serial port as the iBMC serial port, see KunLun Mission Critical Server V100R001 CMC User Guide.
  • Tools

    ESD wrist strap or ESD gloves

Procedure

  1. Locate the serial port to which the serial cable is to be connected.
  2. Connect the serial cable.

    Connect the RJ45 connector on the serial cable to the serial port on the server properly.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104859

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next