No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an AC PSU in an SCE

Installing an AC PSU in an SCE


Install an AC power supply unit (PSU) in a system compute enclosure (SCE) in any of the following scenarios:

  • An AC PSU has failed.
  • An AC PSU needs to be replaced with a new model.
  • Two AC PSUs are to be added to improve reliability when only two AC PSUs are configured for the SCE.





No data preparation is required for this operation.


  • ESD gloves
  • Packaging materials, for example, an ESD bag


Spare AC PSU


  1. Take the spare AC PSU out of its ESD bag.
  2. Insert the PSU into the SCE as far as it will go. See step (1) in Figure 6-54.
  3. Connect the power cable to the PSU. See step (2) in Figure 6-54.
  4. Close the latch on the power cable. See step (3) in Figure 6-54.

    Figure 6-54 Installing an AC PSU

Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105451

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next