No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing and Removing Server Components

Installing and Removing Server Components

About This Chapter

  • Ensure that the obtained spare parts are compatible and function properly before any replacement.
  • After parts replacement, the software, firmware, and CPLDs on the new components must be upgraded to the version used in the customer environment or to the latest version. It is recommended that the version be upgraded to the version used in the customer environment. For details, see the KunLun Mission Critical Server V100R001 Upgrade Guide
  • After the components are replaced, restore their configurations (including BMC, BIOS, and RAID configurations) on the customer live network.
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104893

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next