Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an Acoustic Door
Scenarios
Install an acoustic door to replace the faulty one.
Prerequisites
Conditions
At least two persons are required to install an acoustic door because the door is heavy.
Data
No data preparation is required for this operation.
Tools
- ESD gloves
- Packaging materials, for example, an ESD bag
- Phillips screwdriver
Hardware
Spare acoustic door
Procedure
- Take the spare acoustic door out of its ESD bag.
Before installing an acoustic door, determine whether the door is a front or rear one. The front acoustic door has an LCD and a cable.
- Lift the acoustic door.
- Align the two pivots with the hinges in the cabinet, and insert the pivots into the hinge holes. See Figure 6-19.
- Connect the ground cable to the ground screw on the acoustic door. See step (1) in Figure 6-20.
- (Only for the front acoustic door) Connect the cable between the LCD and the central management enclosure (CME). See step (2) in Figure 6-20.
Previous
