No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Capacity Reduction from 9032-32P to 9016-12P

Capacity Reduction from 9032-32P to 9016-12P


  1. The procedure is the same as that of Capacity Reduction from 9032-32P to 9016-16P.
  2. Remove SCMs from SCE2-BPUB based on the actual capacity reduction requirement. For details, see Removing an SCM.
  3. Remove SCE 3 and SCE 4. For details, see Removing an SCE or Removing an SCE (Supporting REEs).
  4. Install NI cables and PIP cables that adapt to a 9016-12P. For details, see Installing and Removing Cables.
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104819

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next