No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Non-Hot-Swappable PCIe Card

Installing a Non-Hot-Swappable PCIe Card

Scenarios

Install a non-hot-swappable PCIe card on a back I/O module (BIO) to replace the faulty PCIe card.

PCIe cards of the same type must be installed in different SCEs to provide redundant configuration between SCEs.

Prerequisites

Conditions

No special conditions are required for this operation.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Hardware

Spare non-hot-swappable PCIe card

Procedure

  1. Power off the physical partition where a non-hot-swappable PCIe card is to be installed. For details, see Powering Off the 9016.
  2. Remove the BIO where the non-hot-swappable PCIe card is to be installed. For details, see Removing a BIO.
  3. Take the spare non-hot-swappable PCIe card out of its ESD bag.
  4. Insert the non-hot-swappable PCIe card into the BIO as far as it will go. See step (1) in Figure 6-116.
  5. Close the BIO cover. See step (2) in Figure 6-116.
  6. (Optional) Install a plastic baffle.

    If there is a hollowed-out metal bar on the outer side of the newly installed PCIe card or the PCIe slot is vacant, remove the plastic baffle from the BIO, and install the plastic baffle on the outer side of the PCIe slot.

    Figure 6-116 Installing a non-hot-swappable PCIe card

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 99841

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next