Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Non-Hot-Swappable PCIe Card
Scenarios
Remove a non-hot-swappable PCIe card from a back I/O module (BIO) if the PCIe card has failed.
Prerequisites
Conditions
No special conditions are required for this operation.
Data
No data preparation is required for this operation.
Tools
- ESD gloves
- Packaging materials, for example, an ESD bag
Procedure
- Power off the physical partition where the non-hot-swappable PCIe card is located. For details, see Powering Off the 9016.
- Remove the BIO where the non-hot-swappable PCIe card is located. For details, see Removing a BIO.
- Hold down the latch on the BIO cover. See step (1) in Figure 6-115.
- Open the BIO cover. See step (2) in Figure 6-115.
- Gently remove the non-hot-swappable PCIe card. See step (3) in Figure 6-115.
- Place the removed PCIe card in an ESD bag.
If you do not want to install a PCIe card immediately, install a plastic baffle in the slot for ventilation.