No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators and Buttons on the REE Front Panel

Indicators and Buttons on the REE Front Panel

Figure 2-50 shows the indicators and buttons on the REE front panel.

Figure 2-50 Indicators and buttons on the REE front panel

Table 2-34 describes the indicators and buttons.

Table 2-34 Indicators and buttons on the REE front panel

No.

Silk Screen

Location

Indicator/Button

Color

Description

1

Switch module panel

Switch module power indicator

Green

  • Off: The switch module is not powered on.
  • Steady green: The switch module has been powered on.

2

Switch module panel

Switch module health indicator

Red and green

  • Off: The switch module is not powered on.
  • Steady green: The switch module is operating properly.
  • Blinking red at 1 Hz: A major alarm is generated.
  • Blinking red at 5 Hz: A critical alarm is generated.

3

-

Hard disk ejector release button

Hard disk fault indicator

Yellow

  • Off: The hard disk is operating properly or cannot be detected in a RAID array.
  • Blinking yellow: The hard disk is located, or RAID is being rebuilt.
  • Steady yellow: The hard disk is faulty or cannot be detected.

4

-

Hard disk ejector release button

Hard disk activity indicator

Green

  • Off: The hard disk is faulty or cannot be detected.
  • Blinking green: Data is being read from or written to the hard disk, or synchronized between hard disks.
  • Steady green: The hard disk is inactive.

5

-

Near the switch module FPC slot

FPC 1 health indicator

Red and green

  • Off: The FIO-G is not powered on.
  • Steady green: The FPC is operating properly.
  • Steady red: The FPC is not installed, is not properly installed, or is unhealthy.

6

-

Near the switch module FPC slot

FPC 2 health indicator

Red and green

  • Off: The FIO-G is not powered on.
  • Steady green: The FPC is operating properly.
  • Steady red: The FPC is not installed, is not properly installed, or is unhealthy.

7

Fan

Fan module status indicator

Red and green

  • Off: The device is not powered on.
  • Blinking red at 0.5 Hz: An alarm is generated. You can view the alarm information to identify the cause.
  • Steady green: The device is operating properly.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 76607

Downloads: 245

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next