Configuring Physical Partitions
Scenarios
Log in to the central management console (CMC) WebUI and switch the physical partition mode.
Prerequisites
Conditions
The 9016 server is Standby.
Data
No data is required.
Procedure
- Log in to the CMC WebUI.
For details, see Logging In to the CMC WebUI.
- Choose Partition Management on the menu bar and then KPAR in the navigation tree.
The KPAR page is displayed, as shown in Figure 5-4.
- Click Switch Physical Partition Mode. The Switch Physical Partition Mode window is displayed, as shown in Figure 5-5.
- Select a desired physical partition mode. In the displayed dialog box shown in Figure 5-6, enter the password of the root user.
- Click OK.
After the operation, you can view the new physical partition in Resource.
After the operation, you cannot switch the physical partition mode in 10 minutes.