No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a DIMM

Installing a DIMM


Install a DIMM in any of the following scenarios:

  • A DIMM has failed.
  • The memory capacity needs to be expanded.



Each memory board module (MBM) provides 12 DIMM slots. The entire cabinet provides 384 DDR4 DIMM slots. Each MBM provides four memory channels, numbered 0 to 3. Figure 6-69 shows the DIMM positions.

Figure 6-69 DIMM positions


When installing DIMMs, follow the rules described in Table 6-2. Each MBM supports one, two, four, eight, or twelve DIMMs.

Table 6-2 DIMM configuration rules

Number of DIMMs

DIMM Installation Sequence




DIMM 00, DIMM 20


DIMM 00, DIMM 10, DIMM 20, and then DIMM 30


DIMM 00, DIMM 10, DIMM 20, DIMM 30, DIMM 01, DIMM 11, DIMM 21, and then DIMM 31


DIMM 00, DIMM 10, DIMM 20, DIMM 30, DIMM 01, DIMM 11, DIMM 21, DIMM 31, DIMM 02, DIMM 12, DIMM 22, and then DIMM 32


DIMM 00, DIMM 10, DIMM 20, and DIMM 30 are four primary memory channels.


  • ESD gloves
  • Packaging materials, for example, an ESD bag


Spare DIMM


  1. Remove the memory board module (MBM) where a DIMM is to be installed. For details, see Removing an MBM.
  2. Take the spare DIMM out of its ESD bag.
  3. Ensure that the two fixing clips of the DIMM slot are fully opened. See Figure 6-70.

    Figure 6-70 Fully opened fixing clips of a DIMM slot

  4. Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See steps (1) and (2) in Figure 6-71.

    The fixing clips of the slot are closed automatically.

    Figure 6-71 Installing a DIMM

Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 105266

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next