No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Hard Disk

Installing a Hard Disk

Scenarios

Install a hard disk in any of the following scenarios:

  • A hard disk has failed.
  • A hard disk needs to be replaced with a new model.
  • A hard disk has no free space.

Prerequisites

Conditions

No special conditions are required for this operation.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Hardware

Spare hard disk

Procedure

  1. Press the button on the hard disk tray of the hard disk to be removed. The black handle automatically ejects. See step (1) in Figure 6-93.
  2. Hold the black handle and pull out the hard disk support. See step (2) in Figure 6-93.

    NOTE:

    The hard disk tray cannot completely pull out of the FIO.

    Figure 6-93 Removing a front hard disk tray

  3. Take a spare hard disk out of its ESD bag.
  4. Fully raise the ejector lever, and insert the hard disk into the front I/O module (FIO) as far as it will go. See step (1) in Figure 6-94.
  5. Ensure that the ejector lever is engaged with the FIO beam, and close the ejector lever to completely insert the hard disk into the FIO. See step (2) in Figure 6-94.

    Figure 6-94 Installing a hard disk

  6. Hold the black handle and push the hard disk tray into the FIO until you hear a sound. See step (1) in Figure 6-95.

    Figure 6-95 Installing a hard disk support

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 99436

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next