No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an AC PSU from an SCE

Removing an AC PSU from an SCE

Scenarios

Remove an AC power supply unit (PSU) from a system compute enclosure (SCE) in any of the following scenarios:

  • The AC PSU has failed.
  • The AC PSU needs to be replaced with a new model.

Prerequisites

Conditions

When an SCE is configured with four PSUs, remove a PSU without powering off the SCE if the other two or three PSUs in the SCE are supplying power properly.

Observe PSU indicators to check the PSU status. For details about the indicators, see Indicators and Buttons.

Data

No data preparation is required for this operation.

Tools

  • ESD gloves
  • Packaging materials, for example, an ESD bag

Procedure

  1. Open the latch on the power cable. See step (1) in Figure 6-53.
  2. Remove the cable from the PSU. See step (2) in Figure 6-53.
  3. Hold down the latch on the PSU, and partially pull out the PSU by holding its handle. See step (3) in Figure 6-53.
  4. Release the latch, and pull the PSU out of the slot. See step (4) in Figure 6-53.
  5. Place the removed PSU in an ESD bag.

    Figure 6-53 Removing an AC PSU

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 74815

Downloads: 245

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next