Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LPM Mainboard
Figure 2-59 shows the mainboard layout of a local partition management module (LPM).
Connectors and components of an LPM mainboard
No. |
Component |
No. |
Component |
|---|---|---|---|
1 |
Trusted platform module (TPM) connector |
2 |
Backplane signal connector 1 |
3 |
Backplane power connector |
4 |
Backplane signal connectors 2 |
5 |
Backplane connection guide sleeves |
6 |
Platform Controller Hub (PCH) heat sink |
7 |
PCH coin battery |
8 |
I/O card connection pins |
9 |
I/O card signal connector |
10 |
USB connector |
11 |
Hi1710 chip heat sink |
12 |
PCIe cable connection indicator |
13 |
Central management enclosure (CME) PCIe connector |
14 |
Serial port connector |
15 |
Local partition management module (LPM) health indicator |
16 |
Primary basic partition unit (BPU) indicator |
17 |
UID indicator |
18 |
SD card connector |
Previous
