No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


KunLun 9016 V100R001 User Guide 12

This document describes the appearance, specifications, parameters, and structure of the KunLun 9016, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting an External AC Power Cable of a Cabinet

Connecting an External AC Power Cable of a Cabinet


  • Precautions
    • Power cables must be securely connected.
    • Use dedicated power cables to ensure equipment and personal safety.
    • Power cables are used only for KunLun servers. Do not use them for other devices.
  • Preparations for installation

    The 9016 connects the power distribution frame (PDF) or power socket in the equipment room and the power distribution units (PDUs) in the cabinet by using industrial plugs. The rated voltage of a single-phase AC PDU is 220 V AC, and its maximum input current is 32 A.

  • Tools

    ESD wrist strap or ESD gloves


  1. (Optional) If there is no industrial female connector in the equipment room, use a female connector shipped with the cabinet. Make a power cable for the female connector (see Figure 3-109), and bundle any extra length of the cable to the top or bottom of the cabinet.
    Figure 3-109 Making a power cable for a female connector

  2. Locate the female connector to which the power cable is to be connected.
  3. Connect the cable between the female connector and the male connector. See Figure 3-110.
    Figure 3-110 Connecting a power cable


    The server supports dual power supplies for redundancy. If you are using a single-phase power supply, the label INPUT 1 and INPUT 2 on the industrial plug indicates one input and the label INPUT 3 and INPUT 4 indicates the other input.

  4. Repeat the preceding steps to connect other power cables.
Updated: 2019-05-20

Document ID: EDOC1000111827

Views: 104457

Downloads: 251

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next